Payment & Shipping Terms:
|Wire Type:||Flat Or Round Wire||Finished Coil Height:||550mm Max.|
|Max Flat Wire:||5x12mm||Round Wire:||0.3-5.0mm|
|Motor Power:||4kw||Winding Speed:||0-120rpm|
|Rotating OD:||600mm Max.||Warranty:||12 Months|
Automatic 550mm Height Coil Winding Machine With Servo Motor Driven Wire Guide
Automatic 550mm Height Coil Winding Machine With Servo Motor Driven Wire Guide is a special winding equipment for winding flat or round wire. This winding machine can wind not only copper wire but also aluminium wire, with the max size 5.0mm (round wire diameter) and 5x12 mm (flat wire). The wire guide is driven by one servo motor with 750w, which makes the wire guide have an excellent stop-start behaviour. The main winding motor is 4kw power motor, which provides enough toque to drive the winding shaft to wind wire. The counter can count the number of the turns when winding, moreover the counter can count reversely when the machine winds back.
1. Main frame, the machine’s frame is steel welded, it is very strong to guarantee the machine is stable when winding
2. Main winding unit, it is composed of main winding motor, winding shaft, and tailstock, etc.
3. Wire laying unit, including servo motor, linear guide and wire guide
4. Insulation decoiler, insulation paper can placed on it
5. Electronic cabinet, in which, there is VFD, PLC, and other electrical components.
6. Pneumatic system, providing power for the cylinder
Typical standard specifications of ZPX550 are shown below, however these can be easily modified as requested.