Payment & Shipping Terms:
|Wire Material:||Copper Or Aluminium||Transverse Width:||Max. 550mm|
|Max Flat Wire:||5x12mm||Round Wire:||0.3-5.0mm|
|Motor Power:||4kw||Rotating Speed:||0-120rpm|
|Finished Coil OD:||600MM Max.||Center Height:||900mm|
PLC Control Transformer Coil Winding Machine To Wind Copper Or Aluminium Wire
PLC Control Transformer Coil Winding Machine To Wind Copper Or Aluminium Wire ZPX550 is a professional winding equipment to winding transformer coil. This winding machine is provided with wire laying technology, which can lay wire automatically when winding. The tension technology is also used to make the wire tight when winding. The servo motor is used to drive the wire guide, which guarantees the excellent stop start behaviour. All of the parameters can be input through a user friendly interface, which makes the operation simply and easy.
1. Main frame, strong steel welded frame
2. Main winding unit, including motor, winding shaft, etc.
3. Wire laying unit, including linear guide, wire guide and servo motor, etc.
4. Insulation dereeler, to place insulation paper
5. Electronic cabinet
6. Pneumatic system
Typical standard specifications of ZPX550 are shown below, however these can be easily modified as requested.
|Tailstock:||Live center (optional)|
|Winding Speed:||0-120 rpm|
|Regulating Speed:||stepless speed regulation|
|Round Wire Diameter:||0.3-4.0mm|
|Flat Wire:||5x12mm max|
|Maximum Coil Height:||550mm|
|Maximum Finished Coil Height:||600mm|
|Minimum Spread Pitch:||0.01mm|
|Counting Range:||0 - 9999.9|
|Saved Winding Programs Number:||more than 50 pcs|